$25 - $50

GHS1027 Simplified Pictogram Wall Chart (24" x 36") by GHS Safety

Simplified Pictogram Chart quickly illustrates the HazCom GHS hazard pictograms in a big and bold format. The large sized pictograms are easily read from a distance making it a handy reference for any work environment. Printed in full color on sturdy semi-rigid plastic, this chart is easily mounted on any wall.

May be used for both indoor and outdoor applications. Available in two sizes.

T76 Waterproof TDS Tester with Replaceable Electrode (high range) by Milwaukee

These instruments are designed for all applications. It's IP65 Waterproof casing and replaceable electrode make them suitable also for heavy duty applications, such as Waste Water treatment and Agriculture. The modular design allows easy electrode and battery replacement.

All Waterproof testers are supplied in a leather casing complete with calibration solution, batteries, instruction manual and screwdriver for calibration.

The T76 is a waterproof TDS tester with automatic temperature compensation, 1 point manual calibration and a range of 0 to 9999 ppm (mg/L). The tester has a replaceable electrode and is supplied complete with sachets of calibration solution, leather casing and calibration screwdriver.

TDS30000 Conductivity Solution, 30,000ppm/30,100uS,1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

VPP Touch Probe for VPE only by Superior AccuTrak

Touch Probe for the AccuTrak VPE - (does NOT fit VPE-GN "Gooseneck" models). The VPE Touch Probe allows a technician to listen to internal ultrasonic noise, such as that created by internal bypass in a valve, friction in a moving part, etc. The Touch Probe allows an HVAC/R professional to diagnose a thermal expansion valve in just 5 minutes.

Applications:

• Fits: VPE

*Please note we can only ship RKI products to customers within the United States

10-141-30 Ethanol Colorimetric Gas Detection Tube, 100 - 2000 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

18523-71 Type K Thermocouple Probe Quick Dis-connector, with Std-Connector, 12" L, .125 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with ICONEL 600 sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

98766-10 60-Minute Analog Timer; 1/Ea by Digi-Sense

The timer's indicating pointer always shows the time remaining on an easy-to-read, tilted dial. Bell sounds at end of cycle.

• Simple analog dial can be set from 1 to 60 minutes
• Set pointer to desired time interval - time winds down automatically

Evaporator Filter

18526-29 Type K Economic Bolt On Thermocouple Probe #8 Screw with Mini-Connector, 24" Fiberglass Ext. Grounded by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Available in #6 (M3.5) or #8 (M4) screw sizes and different lead lenghts
• Response Time: 2-4 seconds or greater
• Each probe comes with a color coded ANSI mini connector or stripped leads: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

*Please note we can only ship RKI products to customers within the United States

Desk or wall mounted cradle for charging Gas-Pro.

*Please note we can only ship RKI products to customers within the United States

Baffle Assembly for WI-2000P

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States