$150 - $200

90000-25 Traceable Extreme-Accuracy Digital Thermometer with Calibration, 25.00°C; 1 Stainless Steel Probe by Digi-Sense

Four Traceable International Standards Digital thermometers provide the exact readings required for critical requirements, quality control checks, and routine measurements. Units read 0.00, 25.00, 37.00, or a combination of all three with a resolution of 0.01° and an accuracy ±0.05°C within ±2°C of standard. Units read in °C and °F.

Stainless-steel probe supplied with units shows the slightest temperature change. Probe is triple purpose for liquid, air/gas, and semisolids. Accurate readings with tip penetration of 1/3-inch. Probe has a diameter of 1/8-inch, stem length of 6-1/4 inches, overall length of 9 inches and a cable length of 5 feet. Absolute high-precision thermometer is ideal for measuring temperatures in water baths, cuvettes, gas systems, reagents, standards solutions, ovens, incubators, pharmaceuticals, petroleum products, foods, and wastewater. The display shows minimum/maximum and current temperatures. MIN/MAX monitors readings overnight, on weekends, or for any time period and displays the exact time and date when the MIN/MAX temperature occurred. Alarm provides two visual (LEDs) and two audio alerts when temperature rises above or falls below high and low set points. Unit displays the exact time and date when dual thermometer alarms are triggered. Alarms are programmable in 0.1° increments. Visual and audible alarms signal continuously (for days) even if temperature returns to non-alarm range. First thermometer ever designed to permit user one-button calibration.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory|Resolution is 0.01°
• Displays date and time of min/max temperature
• High and low settable alarms|Unit conforms to ITS-90, International Temperature Standard
• Takes routine measurements at 25.00°C

Includes

Stand, hook-and-loop fastener, magnetic strips, wall mount, stainless-steel probe, two AA batteries, and NIST-traceable calibration certificate.

Part Number: 221L-176-0.66

Part Number: 34L-150A-50

5005 pH/mV/Temp. Handheld Meter by Jenco

pH/mV/Temp. handheld meter with build in tabletop stand with LCD digital display. Meter has both ATC and manual temperature compensation. pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Features include a voltage recorder output, reference input pin and BNC input connector. AC/DC Powered.

• All solid state design
• Fast input response
• Low drift and high stability
• Tilt stand
• Greater than 100db 50/60hz rejection
• Battery low indicator
• Extra long battery life
• Auto polarity mv measurement
• Analog recorder output
• Rugged carrying case
• UL approved ac line adaptor
• Aconventional 9v battery
• Manual and ATC for pH measurement
• 0 to 100.0 °C range of temperature measurement
• 0.5 high liquid crystal display readable under bright ambient conditions

Part Number: 44L-98-40

0560 6060 606-1 Pocket PRO Moisture Meter by Testo

testo 606-1 measures material moisture. Material moisture is displayed in percent by weight using stored material characteristic curves for wood and building materials.

• Accurate wood moisture measurement with stored characteristic curves for beech, spruce, larch, oak, pine, maple
• Additional characteristic curves to locate wet points in building materials for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
• Hold function for easy readout of readings
• Display illumination
• Self-test function
• Protective cap for safe storage
• Belt case, wrist strap and calibration protocol included

Part Number: 34L-49-100

Part Number: 58L-154-0.75

This is the equivalent of the CG2-S-25 from BW

Part Number: 58L-175-25

0563 8282 826-T2 Food IR Thermometer with Laser, includes TopSafe by Testo

the testo 826 series has just been optimized. A higher resolution thanks to the new processor ensures even more accurate measurement results. This allows the temperature to be recorded to an accuracy of 0.1 °C. The min./max. display shows the limit values of the last measurement. You can measure and monitor the temperature of the goods reliably and safely.

• Non-contact measurement of surface temperature, ideally suitable for the food sector
• 6:1 optics for fast and accurate measurement
• 1-point laser measurement spot marking
• Combined instrument with infrared and penetration measurement
• Two adjustable limit values
• Waterproof and robust thanks to dishwasher-safe protective cover TopSafe, according to protection class IP65
• Hold function and display of min./max. values

The advantages:

• Always monitor, measure and document temperature accurately, cleanly and quickly.
• Fulfil HACCP regulations, and be able to provide proof at any time.
• Maintain the cold chain in storage and transport.
• Reduce the quantities of spoiled goods and use resources efficiently.
• Measuring instruments calibrated according to strict regulations.
• Conform to HACCP as well as EN 13485.

601A pH/mV Handheld Meter by Jenco

pH/mV handheld meter with manual temperature compensation and pH calibration via knobs and pH slope calibration potentiometer. Has LCD digital display, BNC connector, voltage recorder output and reference electrode pin. AC/DC Powered.

• Liquid crystal display readable under bright ambient conditions
• Three position rocker switch for pH off mv operations
• Recorder output
• All solid state design
• High stability
• Low drift
• Fast response
• Rugged carrying case
• UL approved ac line adaptor
• One conventional 9v battery
• Extra long battery life
• Battery low indicator

Part Number: 221L-161-18.5

This is the equivalent of the CG2-J-2.5-34AL from BW

Part Number: 34L-135A-2.5

BW Technologies Chest Harness

BW Technologies has a wide range of accessories designed to improve the usability of their product lines. The BW Technologies Chest Harness does just that. Simply secure the harness to your body and insert the monitor into the harness. The monitor will fit securely in place on your chest and near your breathing zones. The chest harness is comfortable and tough enough to withstand modern work environments. With the chest harness, the device can continue to be hands free.

Part Number: GACH2

Part Number: 103L-135A-1.5

0560 0510 510 Pocket Pro Pressure Meter with Air Velocity by Testo

The differential pressure meter is ideally suitable for pressure measurements in the range 0 to 100 hPa. testo 510's differential pressure measurement is temperature-compensated for accurate readings. Readings can be displayed in Pascal over the whole measurement range. Magnets at the back of the instrument enable hands-free operation, for instance, while adjusting gas heaters.

• Display in Pascal possible over entire measurement range
• Accuracy: ±0.03 hPa (0 to 0.30 hPa) / ±0.05 hPa (0.31 to 1.00 hPa)
• Temperature compensation
• Magnetic rear permits free-hand work
• Flow velocity measurement with Pitot tube (Pitot tube not included in delivery)
• Air density compensation
• Protective cap for safe storage
• Including wrist strap and belt holder
• Backlit display
• Switchable units: hPa, mbar, Pa mmH2O, mmHg, inH2O, inHg, psi, m/s, fpm

Part Number: 58L-98-200

Part Number: 221L-176-1.1

Part Number: X105340PN