$150 - $200

*Please note we can only ship RKI products to customers within the United States

S450CD/BNC pH Sensor, Flat, Polymer, DJ, 1M, BNC by Sensorex

The S450C and S450CD are flat surface pH probes designed for use in low volume flow applications. These probes are commonly used as part of a pH detector system in laboratory applications such as high pressure liquid chromatography. Available in a cost effective single junction design or with a double junction design for measuring solutions containing compounds that react with silver (Ag).

• Perfect for low volume flow measurements
• Commonly used as part of a pH detector system
• Available with single or double junction design
• Use with any pH/mV meter accepting a BNC connector

08541-22 K20-1-304 Thermocouple Wire Type K 20-Gauge, Glass Braid, 100-ft Spool by Digi-Sense

Wire comes in 20-gauge size, ideal for fabricating your own probes or extension cables (meets ANSI and ASTM standards). Choose from wire with polyvinyl chloride (PVC), fluorinated ethylene propylene resin (FEP/FEP), fiberglass, high-temperature fiberglass, or ceramic fiber outer/inner insulation. These cables are also available in 100-ft or 1000-ft lengths for any application.

*Please note we can only ship RKI products to customers within the United States

08541-37 Thermocouple Probe Wire, Type T, 24-Gauge, Glass Braid with SS Overbraid, 100ft by Digi-Sense

Wire comes in 24-gauge size, ideal for fabricating your own probes or extension cables (meets ANSI and ASTM standards). Choose from wire with polyvinyl chloride (PVC), fluorinated ethylene propylene resin (FEP/FEP), fiberglass, high-temperature fiberglass, or ceramic fiber outer/inner insulation. These cables are also available in 100-ft or 1000-ft lengths for any application.

*Please note we can only ship RKI products to customers within the United States

BK-4400-G-PK Beaker, Glass 400mL - 12 pack by AquaPhoenix

With spouts and strengthened rim with flare trimmed back that offer optimum balance between thermal shock resistance and mechanical strength.

WD-17006-03 InnoCal NIST-Traceable Calibration; 2 to 4 Points, Liquid-in-Glass Thermometer by Oakton

Glass thermometers are one of the most common types of temperature instruments and are available in a variety of styles, sizes, and versions. Their unique characteristics of wide range, precision, repeatability, and quick response create a unique challenge for the metrologist who is calibrating these instruments. InnoCal can calibrate spirit-in-glass (SIG) thermometers. Calibrations for glass thermometers use direct comparison in high-stability liquid baths using Precision Reference Thermometers (PRTs) and Standard Platinum Resistance Thermometers (SPRTs) and high precision displays. The glass thermometers are inspected for cracks and liquid-column separations before testing.

• InnoCal is the only authorized service center for ERTCO brand liquid-in-glass (LIG) thermometers in the United States
• We also calibrate any make and model of LIG thermometers including Brooklyn Thermometer, Miller and Weber, Inc., LSW, and H-B Instruments
• Testing range for liquid-in-glass thermometers is from -80 to 420°C (-176 to 788°F)
• Calibrated at manufacturer's recommended points or at your desired points depending on your specific requirements. Correction factors are also provided for your convenience.

To meet your calibration needs:

• All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's), and test uncertainty ratios (TUR's) at no additional cost!
• This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer's published specification
• EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A. FDA Compliant.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Calibrations on glass thermometers are performed using direct comparison in high-stability liquid baths using high-precision PRT's and SPRT's and displays. Thermometers are inspected for cracks and liquid-column separations before testing. Measurements are performed at 2 to 4 points between -197°C and 550°C.

Points are generally selected at the manufacturer's specified points but customer-specified points can be accommodated. For certificates with more calibrations points, see 17006-05 for 5 to 9 points, and 17006-06 for 10 to 15 points.

WD-35419-33 CON 550 Replacement Conductivity Cell K= 10.0 by Oakton

Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.

20" Poly Fan Blade, 3-Wing

*Please note we can only ship RKI products to customers within the United States

610-1082-000 Single-Gas Calibration (Isobutylene, 100 PPM, Balance Air), 34 Liters by RAE Systems

Green cylinder technology not only saves the environment, it also saves time and money.

• Gas cylinder size options 34, 58 and 116 liter
• Green Refillable cylinder
• "Strip and Ship" program for easy return of empty cylinders
• Small cylinder footprint
• Cylinder technology offers exceptional gas stability
• All gas cylinders use the same valve

AM-DSR1225 Metal Duct Storage Rack, 12" by Schaefer

Made of durable metal for safe duct storage. Stores up to two 15' duct lengths or one 25' duct. Holds compressed duct securely with the retention bar while allowing for easy removal. Designed with a centrally located handle to maximize portability. Available for 8" and 12" ducting only.