$150 - $200

08084-09 TI.30 12 Silicone Filled Back-Con Bimetal Thermometer, 3" Dial, 12" L/25-125F/-5-50C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases).

Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

Key Features

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200°F

*Please note we can only ship RKI products to customers within the United States

HWKIT-LGSHUTTER Large Shutter Retrofit Kit by Schaefer

Use shutter motors to open a shutter wider to improve airflow when in use or to keep the shutter closed when not in use. Easy to install and operate. Shutter motor kits for large and small shutters available.

Features and Benefits:

• Available for retrofit applications on shutters over 48"
• Does not include shutter motor

FH-1200 12" Fiberglass Weatherhood with Mounting Flange by Schaefer

• Draws outside air through walls up to 6" thick
• Mounts flush to an interior wall
• Weatherhood protects bird screened inlet from the elements
• Durable polyethylene housing with insulated damper door and air-stop door adjust airflow volume and direction with the seasons

18526-56 Type K Flat-Leaf Thermocouople Probe, with Mini-Connector, 4.5" L, 5ft Coil Cord by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Ideal for measuring in hard to reach spaces due to a flexible tip
• Designed for extremely fast response due to the low mass but yet more durable than other miniature diameter probes (.035" thick at tip)
• Response Time: .75 seconds or greater
• Each probe comes with a color coded ANSI coiled cable: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

Pro-Kool Evaporative Cooling Pad, 8" X 12" X 54" - 4 Required Per Unit

*Please note we can only ship RKI products to customers within the United States

ASO Kit, 220V

*Please note we can only ship RKI products to customers within the United States

Old Part Number: 107205
New Part Number: J1072.5VN

BV1 Ball Valve, 1" Full Port, S675, S676, S677 by Sensorex

Sensorex BV-1 full port 1" CPVC ball valve is designed for use with our S675 Series Wet Tap Insertion Assemblies and S656CD pH Sensors. The BV1 mounts a pH sensor in pressurized lines or the sidewall of tanks. Sensors can be retracted for service without shutting down lines or the need to empty tanks. Constructed of durable CPVC.

• Proven design: Remove sensors for cleaning and maintenance without system shutdown
• Full port 1" design: Compatible with Sensorex insertion assemblies & sensors
• One year limited warranty: We stand behind all our products with the Sensorex Guarantee
• Designed for use with our S675 Series Wet Tap Insertion Assemblies and S656CD pH Sensors

CS150TC-K=0.1 Light-Duty Contacting Conductivity / TDS Sensor with Automatic Temperature Compensation (ATC), Graphite, 12mm, TC, K=0.1 by Sensorex

The CS150 and CS150TC conductivity probes are a cost effective solution for measuring conductivity in light industrial and laboratory applications.

Sensors feature measuring surfaces. The durable epoxy body construction provides a rugged and dependable sensor for portable and laboratory use. Suitable for use with most portable conductivity meters.

By adding a simple mounting gland fitting, customers may use these in process applications. Mount them in-line, in a pipe "T" fitting, or submerse them into a tank.

Features:

• Ideal for laboratory and light duty process applicationsAvailable with or without ATC (temperature sensor)
• Easy to submerge in a tank or mount inline in a pipe
• Cell constant choices of 0.1 or 1.0
• Compatible with most portable and benchtop meters