$150 - $200

*Please note we can only ship RKI products to customers within the United States

Old Part Number: 101660
New Part Number: J101660PA

WD-17002-20 InnoCal NIST-Traceable Calibration; Data Logger by Oakton

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated. Measurements reported on our reports are traceable to SI units via national standards maintained by NIST and are performed in compliance with MIL-STD-45662A, ANSI/NCSL Z540-1-1994, 10CFR50, Appendix B, ISO9002-94, and ISO/IEC 17025:2005

InnoCal's Metrology Laboratory is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA); certificate number 1746.01. This accreditation is your assurance that one of the foremost outside auditing agencies approves of our internal laboratory policies and procedures.

• NIST-Traceable calibrations for dataloggers

0560 1410 01 410i Vane Anemometer Wireless Smart Probe by Testo

The testo 410i Smart Probe is a compact wireless vane anemometer for measuring air velocity, and temperature and deriving volume flow. It is used at air outlets, and for monitoring the air flow of ventilation systems. Users can read the measurements using the testo Smart Probes App installed on their smart device. It is easy to configure volume flow measurements and to reliably run timed multipoint averaging traverses. It is especially useful for balancing multi-outlet ventilation systems by using several instruments. The testo 410i works on smart devices with either Android or Apple operating systems.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap! All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures air velocity, volume flow, and temperature
• No air density correction required due to design
• Measures air flow at registers and automatically calculates volume flow (enter duct dimensions simply)
• Measure volume flow at several outlets simultaneously (using mutiple Smart Probes) to adjust system balance
• Timed/multipoint averaging to get accurate air flow profiles
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

9531300 Pocket Pro High Range TDS Tester by AquaPhoenix

Hach Pocket Pro and Pro+ deliver accurate results with built in diagnostics, replaceable batteries, and a large, easy-to-read LCD screen.

Includes: tester, 4 AAA batteries, lanyard, calibration solution and quick start guide.

• Operating Temperature Range: 0 - 50 °C
• Parameter: HR TDS, Temp
• Range: 0 to 10.00 ppt

Part Number: J1011100PM2

0560 1405 01 405i Hot-wire Anemometer Wireless Smart Probe by Testo

The testo 405i Smart Probe hot-wire anemometer is a wireless instrument for measuring air flow velocity, temperature, and volume flow. It is equipped with a telescopic shaft which extends to 15" for easy in-duct testing. You can reliably determine timed and multipoint flow traverses. Users can read the measurements using the testo Smart Probes App installed on their smart device. The app lets users configure duct dimensions to calculate volume flow measurements. Use the testo 405i along with the testo 605i thermo-hygrometer to determine cooling and heating performance. The testo 405i works on smart devices with either Android or Apple operating systems.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap! All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures air velocity, volume flow, and temperature
• Measures in-duct air flow and automatically calculates volume flow (enter duct dimensions simply)
• Small dia. (<0.5") and 15" telescopic shaft length is ideal for in-duct flow averaging and timed traverse
• Perform air duct leakage tests
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

Old Part Number: 107530
New Part Number: J197830LA

Wall Mount, Adjustable, For up to 24in. Fans, Stainless Steel

93452 Ultima Edge - 18mm Flat Field Eyepiece - 1.25" by Celestron

See the whole picture with Ultima Edge. These flat-field eyepieces were designed to provide an ultra-sharp, ultra-clear, crisp image from the center all the way to the edge of the field of view. The 18mm Ultima Edge eyepiece features fully multi-coated optics and an 8- element lens design, maximizing light transmission.

The Ultima Edge 18mm has a generous 65° field of view perfect for viewing planets, stars and the Moon's surface. This eyepiece provides higher-powered magnification, perfect for those times when you want to get up close to smaller objects.

Body

The 18mm Ultima Edge eyepiece's main housing is machined from high grade aluminum with a black anodized outer surface.

Its 1.25" mounting barrel is internally threaded to accept standard 1.25" filters and adapters. It is compatible with 1.25" star diagonals and focusers. On the exterior of the eyepiece, you will find a uniquely designed, molded rubber grip ring for non-slip handling during observing sessions.

Viewing through the 18mm Ultima Edge eyepiece is comfortable for both eyeglass wearers and non-eyeglass wearers alike, thanks to the rubber eyecups and long eye relief of 20mm.

Convenient Parfocal Design

Spend more time observing and less time focusing! When you buy more than one Ultima Edge eyepiece, you can switch between them without refocusing thanks to their parfocal design. With a set of Ultima Edge eyepieces in your kit, you'll be able to enjoy a wide range of high and low power views–and switch between them quickly and easily. That means you can get more out of every observing session.

NOTE: Ultima Edge 24mm is not a parfocal eyepiece. Ultima Edge eyepieces are only parfocal within the line and do not maintain focus when swapped with parfocal eyepieces from other brands or series.

• 18mm parfocal Ultra Flat Field eyepiece designed for 1.25" focusers
• Incredibly crisp views from center to edge of field
• Fully multi-coated, 8-element lens design for excellent light transmission
• Wide 65° apparent field of view allows you to see more of the night sky
• Generous 20mm eye relief and fold-down rubber eyeguard for comfortable viewing with or without eyeglasses
• Molded rubber grip ring for non-slip handling

Part Number: J197885VN

Part Number: J197150LM8

*Please note we can only ship RKI products to customers within the United States

Part Number: J19711.62VA

610-0022-000 Three-Gas Calibration Mix (CO 50 PPM / CH4 50% LEL (2.5% VOL) / O2 18%, Balance N2), 34 Liters by RAE Systems

Green cylinder technology not only saves the environment, it also saves time and money.

• Gas cylinder size options 34, 58 and 116 liter
• Green Refillable cylinder
• "Strip and Ship" program for easy return of empty cylinders
• Small cylinder footprint
• Cylinder technology offers exceptional gas stability
• All gas cylinders use the same valve