$150 - $200

WD-17107-00 InnoCal NIST-Traceable Calibration; Hydrometer, 1-point by Oakton

All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's) and test uncertainty ratios (TUR's) at no additional cost!

NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification. Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays. EPA, USDA, ISO and GLP/GMP standards require regular NIST-Traceable calibration of all test equipment being used in critical applications.

• Provides traceability to NIST
• Lists the environmental conditions present at time of calibration
• Certificate lists actual values, uncertainties, and tolerances
• Regular calibration helps you meet ISO, EPA, GLPs/GMPs and other quality standards
• Not an accredited certificate

Includes

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated.

Part Number: J101610PM4

*Please note we can only ship RKI products to customers within the United States

Old Part Number: 1049100
New Part Number: J1049100PA

17050-00 InnoCal NIST-Traceable Calibration; Tachometer by Digi-Sense

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated. Measurements reported on our reports are traceable to SI units via national standards maintained by NIST and are performed in compliance with MIL-STD-45662A, ANSI/NCSL Z540-1-1994, 10CFR50, Appendix B, ISO9002-94, and ISO/IEC 17025:2005

InnoCal's Metrology Laboratory is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA); certificate number 1746.01. This accreditation is your assurance that one of the foremost outside auditing agencies approves of our internal laboratory policies and procedures.

• Calibration service for contact tachometers (mechanical), non-contact tachometers (optical), and combination tachometers featuring both contact and non-contact options

Part Number: J19788.5VN

0560 9056 905-T2 Temp Stick (surface probe) by Testo

testo 905-T2, the complete innovation. A surface thermometer in professional quality at the lowest price. The sprung thermocouple measurement head guarantees a very fast reaction time and high accuracy by always lying flat, even on rough surfaces.

• Very fast reaction time
• High accuracy
• Sprung thermocouple cross-band adapts to any surface
• Easy readout of readings due to rotatable display
• Very simple to operate
• Auto-Off function

Old Part Number: 104925
New Part Number: J104925LA

98767-07 Traceable® Tachometer with Calibration; Touch by Digi-Sense

Obtain speed measurements from centrifuges, pumps, rollers, shafts, gears, motors, and moving surfaces with this contact tachometers. Three tips are included for added versatility - simply touch the tip to the surface to be measured.

Compact tachometer fits easily in your hand, pocket, and toolbox, and features a HOLD button to freeze the displayed reading.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Obtain both RPM and surface speeds - in feet per minute, meter per minute, or yard per minute

Includes

One 9 V battery, convex cone tip, concave funnel tip, speed wheel tip, and NIST-traceable calibration certificate with data.

98767-45 Traceable IR Gun Thermometer with Laser and Calibration by Digi-Sense

Simple one-handed point-and-shoot operation makes it easy to use anywhere you need to take temperature measurements. Noninvasive measurements are ideal for food preparation, life sciences, and pharmaceutical applications.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Laser-sighting pinpoints your measurement area for accurate measurements
• Backlighting permits viewing in low light conditions
• °F/°C selectable
• Features HOLD, MAX, and low-battery indicator

Includes

batteries and NIST-traceable calibration certificate with data.

610-0015-000 Single-Gas Calibration (Propane, 100 PPM, Balance Air), 34 Liters by RAE Systems

Green cylinder technology not only saves the environment, it also saves time and money.

• Gas cylinder size options 34, 58 and 116 liter
• Green Refillable cylinder
• "Strip and Ship" program for easy return of empty cylinders
• Small cylinder footprint
• Cylinder technology offers exceptional gas stability
• All gas cylinders use the same valve

94021 Aluminum Dew Shield with Cover Cap - 8" by Celestron

The Celestron Aluminum Dew Shield with Cover Cap is an essential accessory that protects your telescope tube in the field. The dew shield reduces radiative cooling of the Schmidt corrector lens to the night sky, thus keeping the lens below the dew point longer preventing dew formation on the lens. Additionally, the Aluminum Dew Shield increases image contrast by blocking stray light from entering the telescope for better viewing and astroimaging. Use the Aluminum Dew Shield on your 8 EdgeHD, RASA, or Schmidt Cassegrain (made after 2006) telescope tube confidently, knowing it was created for your exact instrument.

Construction

The Aluminum Dew Shield provides a perfect, custom fit for 8" Celestron telescope tubes. The exterior of the dew shield is a rigid, aluminum cylinder that will not fold, flex, or deform. Inside, a velvet-lined interior absorbs any additional stray light and excess moisture, creating optimal contrast when viewing and imaging. Attach the dew shield to your telescope tube with the two adjustable clips to ensure a snug fit.

We've also constructed the cover cap from durable yet lightweight aluminum. When your telescope is not in use, place the cover cap on your dew shield to protect your Schmidt corrector from stray dust particles. The cover cap also offers you the ability to quickly and easily acquire dark frames for imaging.

If you're an astroimager who enjoys using your Schmidt-Cassegrain or EdgeHD in the Fastar/Hyperstar configuration or the RASA, you're probably used to running cables out the front of the dew shield. Simplify and streamline your setup with the Aluminum Dew Shield's integrated cable management slot at the base. This slot gives you an easy way to corral essential cables (like the ones for our Dew Heater rings) without potentially allowing light pollution to leak in. Also, there are cutouts to accommodate dovetail rails on the top and bottom of the telescope tube, ensuring a good fit regardless of the configuration.

Enhance your setup

When purchasing this item, you will receive 2x adhesive Celestron logo labels. Use them on your dew shield or anywhere else you like!

Check out the 8" Dew Heater ring and the Smart DewHeater and Power Controllers to optimize your setup for the ideal dew-free night of observing and imaging.

• Fits 8" Schmidt-Cassegrain, EdgeHD, and RASA telescope tubes
• Helps prevent dew formation on the Schmidt corrector lens
• Prevents off-axis glare from entering the optical system
• Rigid body with a velvet-lined interior surface to reduce stray light
• Two adjustable clips for easy installation and disassembly
• Cable management at the base of the shield–perfect for using the Fastar/Hyperstar configuration or using in conjunction with the Celestron Dew Heater Rings
• An included cover cap keeps your telescope free from dust when not in use