$150 - $200

91210-30 Traceable® Water-Resistant Thermocouple Thermometer with Calibration by Digi-Sense

The rugged ABS construction makes this meter shock-resistant, and is gasketed in order to seal out dirt, dust, fumes and water. Perfect for use in lab or plant environments. A microprocessor updates the display twice every second. The meter features recall, min/max, Hold, °F/°C selectable units, count-up timer, and high/low alarm. Accepts type K thermocouple probes with miniconnector. Back-lighting button permits reading in dark areas.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Fast-response microprocessor updates the display twice a second
• Water-resistant case

Includes

Beaded-wire type K probe, NIST-traceable calibration certificate with data, PVC protective casing with flip-out stand, and three AAA batteries.

517691BT Combi-Pack: Copper No. 1 / No. 2 by AquaPhoenix

Range: 0.3 - 5.0 mg/l, Qty: 100 Tests

AAA002002 SGT Disposable Single Gas Detector, O2 (0~30%vol) by Senko

SGT is a single disposable detector. It operates continuously for two (2) years even without replacing the battery or gas sensor to protect workers from oxygen deficiency or toxic gases. It measures a gas continuously and displays its concentration and raises an alarm when a risk occurs.

KEY FEATURES

• Disposable Design: No battery or sensor replacement needed for 2 years.
• Continuous Operation: 2-year continuous operation for reliable protection.
• IP67 Rating: Water and dustproof for durability in harsh conditions.
• Automatic Sensor Error Detection: Detects sensor errors for reliable performance.
• High-performance Alarms: Audible and vibrating alarms for immediate alerts.
• Event Logging: Logs up to 30 events for tracking and troubleshooting.
• Easy Configuration and Data Management: Managed via IR Link for simplicity.
• Simple Calibration: Easy calibration with a docking station.
• Multi-docking Station: Enables simultaneous bump testing and calibration.
• Explosion-proof Certification: Meets global explosion-proof standards for safe operation.

Part Number: 103L-176-1.05

Part Number: 34L-176-0.66

Part Number: 34L-342

Part Number: 34L-328

012-3022-010 RAE-Sep™ Benzene Separation Tubes for UltraRAE Series Monitor (10 Tubes / Box) by RAE Systems

Use these tubes with the UltraRAE 3000 to test for specific compounds, including benzene in oil refinery processes, butadiene in polymer and rubber manufacturing. When used with RAESep tubes, the UltraRAE 3000 photoionization detector equipped with a 9.8eV PID lamp, can get a benzene snapshot in 60 seconds, or deliver a full STEL measurement over a 15 minute period.

Key Features

• Available for benzene and butadiene
• Compatible with 9.8eV PID in the UltraRAE 3000
• Benzene snapshot in 60 seconds
• Full STEL reading in 15 minutes

Applications

• Confined Space Entry
• Environmental Cleanups/Remediation
• Exploration
• Leak Detection
• Plant Shutdown & Turn-Around

Part Number: 34L-340

Part Number: J101650PM1

PM1S000001SE Be Safe Single Gas Personal Monitor, Sensor: SO2, Range 0-50 ppm by Seitron Americas

Be Safe SG is the new portable single gas detector, designed to be compact, robust and easy to use. Configurable for 1 gas including O2, CO, H2S or SO2, it can be used in hazardous areas with explosion risk.

Portable Gas Detector

• 24 months of continuous operation
• Reliable detection of low concentrations of toxic and flammable gases
• Durable and easy to operate
• Integrated alligator clip
• Intrinsically safe
• Self-test function
• Event log storage
• Approved for ATEX Zone 0

Be Safe SG Kit includes:

• Portable gas detector
• Calibration cap
• Quick Guide
• Test report
• Declaration of conformity ATEX and IECEx

• INCREASED SAFETY: Built-in audible, vibration and visual alarms for an immediate danger warning.
• SOLID AND RELIABLE: The rugged and solid housing ensures precise and safe detection in all environments.
• CONTINUOUS PROTECTION: Designed to guarantee continuous operation for 24 months without any need to replace sensors or battery.
• EASY TO USE: Designed from the ground up to ensure the greatest ease of use and intuitiveness possible.

Part Number: 103L-384

Part Number: 58L-35-1

WD-35634-54 ORPTestr® 5 Waterproof Pocket Tester by Oakton

Save money by replacing sensor, not the tester

Measuring water quality can be challenging. You need an instrument that is reliable over and over again. With the Oakton Waterproof Testr 5 Series pocket testers, you not only experience consistent reliability, but you also get a pocketful of useful features and benefits. You can also stretch your budget by only replacing the single-junction sensor and keeping the tester.

• Easy to set up and use
• Intuitive interface has self-diagnostic error messages, and stable reading and battery-life indicators
• Unique colored backlight indicates operating mode
• Simple to calibrate with automatic standard recognition USA or NIST
• Rugged IP67-rated housing is waterproof, dustproof, and floats in water with sensor cap on
• Leakproof cap with fill line functions as a sample, calibration, and hydrating cup
• Uses common AAA batteries

*Please note we can only ship RKI products to customers within the United States

Part Number: 103L-35-1

*Please note we can only ship RKI products to customers within the United States

WD-35625-16 Food TempTestr Mark-I IR Thermometer, with NIST Traceable Certificate of Calibration by Digi-Sense

Ensure your food is at the proper temperature without contamination worries!

Our TempTestr IR Food model is optimized for the food preparation industry. It offers ±1%/1°C (2°F) accuracy in the HACCP critical temperature range of 0 to 60°C (32 to 150°F). This tester s high spectral response lets you take readings through steam. Laser sighting lets you pinpoint your exact target.

• Offers high ±1°C accuracy at HACCP critical temperature ranges
• Infrared temperature measurement provides safe, noncontact readings
• Laser sighting pinpoints your exact target
• °F/°C selectable
• Simple one-handed operation just point and press button! Extremely rapid response time 1/2 second for 95% response

MW401 Standard Portable TDS Meter (range: from 0 to 1990 mg/L) by Milwaukee

MW401 is a TDS Portable Meter, with Automatic Temperature Compensation, and is ideal for the educational and agricultural markets. Soil conductivity is checked before fertilizer application to pinpoint field needs and after fertilization to establish its effectiveness. The EC testing provides all agricultural operation with a method to optimize chemical applications and minimize operational cost.

This instrument has been designed to meet the Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications.

The MW401 has a range of 0 to 1990 mg/L (ppm) with a 10 mg/L resolution; The meter is supplied complete with TDS probe with 1 meter cable and calibration solution.