$100 - $150

Part Number: 34L-367

WD-35808-71 Single-junction, Epoxy-body, Gel-filled pH Electrode by Oakton

Built-in temperature sensor lets you take ATC readings with a single probe

All-in-One Waterproof electrodes feature a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

Each electrode is 12 mm dia with a 3 ft cable.

• Includes a FREE electrode saver bottle to extend electrode life
• Feature a BNC connector for pH and a waterproof 6-pin connector for temperature

390 TDS/Salt Meter by Test Products International

Measure Total Dissolved Solids (TDS), salt and temperature for food, water quality and HVAC maintenance. Easy-to-read LCD display. Measures temperature, TDS concentration and salt levels in solutions.

The AC Volt 50 is a hand held device for determining the presence or absence of AC voltage in insulated wires, wall receptacles, fuses, junction boxes, switches, and any other voltage carrying electrical system. It is not necessary to disconnect the system in question because no contact is required for operation and current flow is not necessary to locate voltage. Simply touch the plastic tip to a connection point or move it along an insulated wire. If AC voltage is present, The AC Volt 50 will sound an audio alert and an LED light in the probe tip will glow bright red. The illumination will stop at a break in the circuit or wire, and this allows the AC sensor to be used as a troubleshooting instrument.

Applications

• Water: Test TDS levels to determine purity
• Food: Test the amount of salt in food, seafood, or processed foods
• Health: Monitor the amount of salt intake
• Water Filtration: Test for TDS to determine performance level of filtration systems
• Pools & Spas: Monitor TDS levels to prevent maintenance problems
• HVAC: Test condensate water in cooling tower and humidifier reservoir applications to prevent bacterial growth
• HVAC: Test TDS levels in make-up water to prevent scale formation, corrosion, and embrittlement
• HVAC: Reduce water and chemical consump tion in boilers and cooling towers
• HVAC: Determine when to perform blowdown and add make-up water
• HVAC: Prevent contamina tion and corrosion of control valves, heat exchangers, and steam traps
• HVAC: Verify automated TDS contollers are functioning properly
• HVAC: Prevent low quality wet steam generation in boilers due to foaming caused by high TDS levels

60 pH Handheld Meter by Jenco

pH handheld meter with BNC, LCD display and manual temperature compensation with two point calibration via potentiometers for ease of use. Case is rugged and splash resistant. AC/DC Powered.

• All solid state design
• High accuracy
• LCD display
• Extra long battery life
• Battery low indicator
• Low cost
• Rugged carrying case
• Power: one 9V DC battery or 115/230v ac adapter

94460-78 Traceable® Wireless Thermometer Set with Calibration; 1 Remote Module w/Bullet Probe by Digi-Sense

Wireless signal from weatherproof remote sensor broadcasts temperature measurements up to 100 feet in an open area. Each set consists of a main unit/receiver and a remote module. A total of three modules may be used with the main receiver. The receiver displays data from all three transmitting modules along with temperature trends. Display MIN/MAX values at the touch of a button. Alarm sounds when temperature exceeds or falls below limits on any channel. Alarm sounds for one minute or until muted or disabled. °F or °C selectable. Supplied with Velcro® and bracket for wall mounting or has a flip-out stand for tabletop use.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Bullet probe (3/4"L x 0.187" dia) is ideal for measuring air and liquid temperatures.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Transmitting modules have a remote probe to measure air, liquids, or solids
• Monitors temperature continuously data is transmitted every 30 seconds
• Bullet probe sensor and cable may be completely immersed

Includes

NIST-traceable calibration certificate with data.

Main unit/receiver, remote module, Bullet probe (3/4"L x 0.187" dia) with 10-ft cable, flip-open stand, wall mount, batteries, and NIST-traceable certificate with data.

765PTAC Thermocouple Panel Thermometer, Type PTA, Range -50.00 to 199.9 °C by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

025-2002-010 Humidity Filtering II Tube (10 Tubes / Box) by RAE Systems

The Humidity Filtering II Tube dries the sample gas entering pumped instruments. It is particularly suited for removing humidity effects on photoionization detectors (PIDs) while making VOC measurements, and typically lasts for about a half hour of continuous readings. The Humidity Filtering II Tube utilizes a solid adsorbent to remove moisture without impacting the detection and measurement of most VOCs.

Key Features

• Enables continuous reading of VOCs under extremely humid conditions for about one half hour (per tube) at room temperature
• Prevents drifting readings at high humidity when the sensor is dirty.
• Attaches to the Flex-I-Probe™ inlet with the same adapter used for ppbRAE 3000 VOC zeroing tubes.
• Especially useful for measuring chlorinated solvents and fuels under high humidity conditions as are often encountered during soil and water remediation.
• Can be used with other instruments having a built-in pump such as MiniRAE Lite, ppbRAE 3000, UltraRAE 3000, MultiRAE Lite, MultiRAE and MultiRAE Pro when humidity is an issue, when using a PID or making low-level LEL sensor measurements.
• Caution: Absorbs some compounds such as ammonia and slows the response of heavy compounds, especially at low concentrations or low temperatures.

Applications

• Soil and water remediation
• VOCs in landfill sites

Part Number: 34L-363

Part Number: 34L-289-300

98767-45 Traceable IR Gun Thermometer with Laser and Calibration by Digi-Sense

Simple one-handed point-and-shoot operation makes it easy to use anywhere you need to take temperature measurements. Noninvasive measurements are ideal for food preparation, life sciences, and pharmaceutical applications.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Laser-sighting pinpoints your measurement area for accurate measurements
• Backlighting permits viewing in low light conditions
• °F/°C selectable
• Features HOLD, MAX, and low-battery indicator

Includes

batteries and NIST-traceable calibration certificate with data.