$100 - $150

iGas Reader

ISC 1810-0883 Regulator, 0.5 LPM, Fits 34DAL, 58DAL, 100GAL

ISC Regulator, 1.0 LPM, Fits 34DAL, 58DAL, 100GAL

ISC 1810-0933 Regulator, 0.5 LPM, Fits 17DS & 34DS

K-1001 Filming Amine (Methyl Orange) CHEMets® Test Kit (0-1 ppm) by AquaPhoenix

The K-1001 CHEMets® Filming Amine Kit comes in a cardboard box and contains everything needed to perform 20 tests: An CHEMets Refill® (R-1000), comparator (C-1001), reaction tube with lid (A-0087F), tip breaking tool (A-0197), and instructions. This kit uses the methyl orange extraction method to measure the concentration of film forming amines (FFA). This test kit is commonly used to measure residual filming amines in boiler and cooling systems to ensure proper dosage of chemicals.

K-2511 Chlorine (Free & Total) ULR CHEMets® Test Kit (0-0.20 ppm) by AquaPhoenix

CHEMetrics Free & Total Chlorine test kit comes in a cardboard box and contains everything needed to perform 30 tests: Refill, Comparator, Activator Solution, 25 mL sample cup, instructions and MSDS.

Shelf life: The comparator contained in this kit has a shelf life of 12 months.

K-6904 Nitrate CHEMets® Test Kit (0-4.5 ppm) by AquaPhoenix

Nitrate test kit comes in a plastic case and contains everything needed to perform 30 tests: Refill, Comparator, 25 mL sample cup, reaction tube with lid, and instructions.

Shelf life: The refill and comparator contained in this kit have shelf lives of 12 months.

K-6909A Nitrate CHEMets® Test Kit (0-225 ppm) by AquaPhoenix

Kit K-6909A comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): Refill, Comparator, 25 mL sample cup, 1.0 mL syringe, reaction tube with lid, and instructions.

Shelf life: The refill and comparator contained in this kit have shelf lives of 12 months

K-6909D Nitrate CHEMets® Test Kit (0-45 ppm) by AquaPhoenix

Kit comes in a plastic case and contains everything needed to perform 30 tests (except distilled water): Refill, Comparator, 25 mL sample cup, 3.0 mL syringe, reaction tube with lid, and instructions.

Shelf life: The refill and comparator contained in this kit have shelf lives of 12 months.

K-7375 COD Vials Kit, 0-15,000 ppm (HR+) Not USEPA Approved, 98 vials by AquaPhoenix

The K-7375 High Range, COD vials comes in a cardboard box and contains 98 vials, enough to perform up to 97 tests, and instruction book.

All COD Kits require the use of a Digestor Block and the V-2000 Photometer, an A-7325 COD Photometer, or a spectrophotometer capable of accepting a 16 mm round cell. Photometers sold separately.

A fresh reagent ampoule blank must be prepared for each series of tests; therefore the number of samples that can be tested with each kit will vary.

K-7376 COD Vials, 0-15,000 ppm (HR+) Mercury-free, 98 vials by AquaPhoenix

The K-7376 High Range Plus, COD vials comes in a cardboard box and contains 98 vials, enough to perform up to 97 tests, and instruction book.

All COD Kits require the use of a Digestor Block and the V-2000 Photometer, an A-7325 COD Photometer, or a spectrophotometer capable of accepting a 16 mm round cell. Photometers sold separately.

A fresh reagent ampoule blank must be prepared for each series of tests; therefore the number of samples that can be tested with each kit will vary.

K-9011 Silica CHEMets® Test Kit (0-0.20 ppm) by AquaPhoenix

Kit K-9011 comes in a cardboard box and contains everything needed to perform 30 tests: Refill, Comparator, Neutralizer Solution, Activator Solution, 25 mL sample cup, sample cup top, and instructions.

Shelf life: The refill contained in this kit has a shelf life of 18 months when stored in the dark and at room temperature.

K-9400 Detergents (anionic surfactants, MBAS) - CHEMets Visual Kit 0-3 ppm by AquaPhoenix

Detergents (MBAS) test kit K-9400 comes in a cardboard box and contains everything needed to perform 20 tests: Refill, Comparator, reaction tube with lid, tip breaking tool, and instructions.

Shelf life: The refill contained in this detergents (MBAS) test kit has a shelf life of 5 months.

Motherboard RFI screening cover

Sensor retainer with sinter (stainless steel) Types 2,3,5,6, IR

4-Point Chest Harness for QRAE 3 Holster Case

Sensor Cover Assembly for Diffusion Model

Replacement purge inlet filter element (914)

1/4" to 10mm PVDF fitting for end-of-line probe

1/8" to 6mm pipe non-return valve (filter drain)

Xgard sensor retainer adaptor (required for fitting Xgard to ESU)

POLI adapters for 5-POLIc harging station (pk of 5)

Rubber boot (Blue)

Rubber boot (Red)