$100 - $150

2448700 Digital Titrator Reagent Set: Hardness, Total, Sequential 100-4000mg/L by AquaPhoenix

For sequential determination of Calcium and Total Hardness by EDTA Digital Titrator titration. Hach method 8329. Range: 100 - 4000 mg/L CaCO3. Set contains Buffer Solution (Hardness 1), CalVer2 Calcium Indicator Powder Pillows, ManVer2 Hardness Indicator Powder Pillows, Potassium Hydroxide Solution (8 N), Sulfuric Acid (5.25 N) and 0.800 M EDTA Digital Titrator Cartridge. Approximately 40 - 100 tests.

• Accurate results - when and where you need them
• Fast and Flexible
• Versatile
• Economical

90433-98 Thermowell, 316 Stainless Steel, 24" Length, 1/2" Connection by Digi-Sense

To match your probe to a thermowell, first measure the distance from the probe's tip to the top of the thread (typical thread length is 0.5" for 1/2" NPT fittings). Next, match this length to the probe depth of the thermowell ("A" dimension). Other thermowell sizes and materials are available - call our Application Specialists for more information.

• Limited-Space Thermowell when you need a shorter insertion depth.
• Standard Thermowell for general-purpose applications.
• Heavy-Duty Thermowell for higher fluid velocity ratings.

08081-03 TI.32 4 Silicone Filled Adjustable Angle Bimetal Thermometer, 3" Dial, 4" L/50-300F/10-50C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases).

Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

Key Features

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200°F

18527-65 Dual Thermocouple Connector, Standard, Female, Type-K; 5/pk by Digi-Sense

• Glass-filled nylon construction with molded barriers to prevent short circuit
• Each connector comes in ANSI color coded material: type J-black, type K-yellow, and type T-blue

CS150 Light Duty Online Conductivity Sensor, Graphite, 12mm, 1 M by Sensorex

The CS150 and CS150TC conductivity probes are a cost effective solution for measuring conductivity in light industrial and laboratory applications.

Sensors feature measuring surfaces. The durable epoxy body construction provides a rugged and dependable sensor for portable and laboratory use. Suitable for use with most portable conductivity meters.

By adding a simple mounting gland fitting, customers may use these in process applications. Mount them in-line, in a pipe "T" fitting, or submerse them into a tank.

Features:

• Ideal for laboratory and light duty process applicationsAvailable with or without ATC (temperature sensor)
• Easy to submerge in a tank or mount inline in a pipe
• Cell constant choices of 0.1 or 1.0
• Compatible with most portable and benchtop meters

*Please note we can only ship RKI products to customers within the United States

WD-17106-20 InnoCal NIST-Traceable Calibration; pH Meter, Handheld/Benchtop by Oakton

Regulatory and quality agencies like FDA and EPA have strict guidelines for the determination and control of pH. Maintain your compliance with the help of InnoCal. We can calibrate new instrument purchases from Cole-Parmer, recalibrate your existing instruments, and provide maintenance and repair services.

InnoCal's metrologists can service most any brand of pH, conductivity, or dissolved oxygen meter including Oakton Instruments, accumet, Fisher Brand, Mettler-Toledo, YSI, WTW, Horiba, Hanna Instruments, Thermo Scientific Orion, VWR SympHony, and others.

Calibrations are performed on any handheld or benchtop pH meter with a BNC connection. The calibration contains five test points for pH (2, 4, 7, 10, 12) and five test points in millivolts across the range. If included, the automatic temperature compensation (ATC) probe will also be tested.

• Five electrical pH and mV test points

90434-04 Thermowell, 316 Stainless Steel, 18" Length, 3/4" Connection by Digi-Sense

To match your probe to a thermowell, first measure the distance from the probe's tip to the top of the thread (typical thread length is 0.5" for 1/2" NPT fittings). Next, match this length to the probe depth of the thermowell ("A" dimension). Other thermowell sizes and materials are available - call our Application Specialists for more information.

• Limited-Space Thermowell when you need a shorter insertion depth.
• Standard Thermowell for general-purpose applications.
• Heavy-Duty Thermowell for higher fluid velocity ratings.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

WD-35614-79 pH 300 & pH 310 Meter Calibration Kit by Oakton

Calibration kit includes pH buffer pouches (five each of 4.01, 7.00, 10.00, and rinse water), squeeze bottle, and hard carrying case. (Meter not included)

MAC-20F 20" High Velocity Direct Drive Floor Fan by Master

High velocity floor fans deliver fast cooling for localized spaces. Perfect for blowing some refreshing air in the garage, or delivering air to cool a generator. These high velocity fans are an effective way to turn down the heat quickly.

• Heavy-duty all metal construction
• Adjustable direction
• Open motors; not suitable for wet or dusty environments
• 1-year limited warranty

08610-26 Traceable® Wall-Mount Digital Clock/Calendar/Thermometer with Calibration by Digi-Sense

Perpetual calendar shows month, date, day of week, and automatically adjusts for leap year. Selectable temperature display for °F or °C; shows room temperature to the nearest 0.5°. Attractive two-tone housing with built-in wall mount bracket.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Features:

• Get accurate, reliable measurements with included NIST-traceable calibration
• Quartz-crystal timing accuracy of 0.01%

Includes:

Two AAA batteries and NIST-traceable calibration certificate with data.

Fluo-250 Calibration Std 100ppb PTSA/ 10ppb Fluorescein-500mL Bottle by AquaPhoenix

Pyxis Calibration Standards & Reagents