$100 - $150

S855/20/TL/TL S8000 ATC Cable, 20ft, TL/TL by Sensorex

The 855 is a shielded, low-noise cable assembly for our S8000 series pH and ORP sensors. This cable assembly has 3/4" NPT thread for inline or submersion installations.

WD-35807-30 Teflon-junction, CPVC-body pH Electrode (Use with pH 100, 200, 800, and 1000 controllers) by Oakton

A. In-line submersible electrodes feature a probe guard to protect sensor from damage. They can be placed in a tee fitting for in-line use. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

B. Submersible electrodes are permanently encapsulated in a 3-ft pipe - perfect for tank installation. ABS plastic body withstands temperatures up to 80°C.

C. Semi-domed bulb electrodes with solution ground have a unique surface design that protects electrode from particulates and increases flow across the junction to keep the bulb clean. Graphite body acts as a solution ground. Withstand temperatures up to 100°C.

D. Self-cleaning flat electrodes have an innovative flat surface that prevents solids buildup. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

E. PTFE junction electrodes are excellent for simple wastewater applications. PTFE junction and polymer gel reference electrolyte resist clogging. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

F. PTFE junction electrodes with solution ground are excellent for tough wastewater applications. Solution ground pin eliminates ground loop and electrical noise problems. PTFE junction and polymer gel reference electrolyte resist clogging. Ryton body with 3/4" NPT thread on both ends withstands temperatures up to 100°C.

• Include BNC connector
• Built-in Pt RTD sensor with stripped ends for temperature (ATC) element
• ORP electrodes feature Pt band sensor
• Use electrodes with solution ground with our pH 200, 800, or 1000 controllers in areas with high electrical noise

ED2001-T EDTA Titrant, 0.01M, 20L by AquaPhoenix

• APHA for Hardness, 2340-C
• Traceable to NIST
• 1 mL = 20ppm as CaCO3 / 50mL

Specifications

• Packaging Type: Cube
• Size: 20.00 L

Part Number: 34L-399-15

90260-24 Precision Liquid-In-Glass Thermometer; -1 to 101C, Total Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are inexpensive and safe for use in laboratories, universities, food/beverage, environmental, wastewater, petrochemical, pharmaceutical and many other general-purpose applications. Fractional-degree thermometers offer higher precision. Choose from partial immersion or total immersion thermometers.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include a ring top and a statement of accuracy supplied by manufacturer.

• Nonmercury blue spirit liquid
• Statement of accuracy

Includes

Ring top and a statement of accuracy supplied by manufacturer.

90550-85 Dampen Bottom-Con Bimetal Thermometer 5" Dial 4" L Range 0-250F (-20-120C) by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than a silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments

BEM401 TDS - PPM Mini-Bench Meter by Milwaukee

• Manual calibration 1 points
• Faster Processor with The New Chipset and Motherboard
• 100% Larger & Easier To Read LED Display
• Smaller, Ergonomic & Lighter Case Design
• Includes 9vDC power supply, mounting Kit, MA811D/1 TDS probe, probe holder, and 20ml 1382ppm calibration solution

Part Number: DXSTAND

Part Number: 34L-135A-1.5

93830-05 Magne-Couple Type K Industrial Probe, with 3" Pigtail by Digi-Sense

Magne-Couple is a thermocouple designed for temporary surface monitoring of any ferrous surface. It attach's to the surface by utilizing a powerful Alnico Magnet with a holding force of 16 lbs, and is capable of withstanding up to 1000 degrees F without degradation. The magnet forces the spring loaded sensing tip into contact with the surface being monitored.

Part Number: 34L-349

Part Number: 34L-99-200

93800-71 Industrial Direct Insert RTD Probe with Aluminum Head, 6" Length by Digi-Sense

Industrial RTDs produce greater accuracy and are broken down into two market segments: industrial and sanitary. Aluminum heads are used in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. Poly heads are used in sanitary applications within the food, drug and pharmaceutical markets. The probes conductor is made of 24 gauge cooper wire and is encased with FEP insulation, and has a 316 stainless steel sheath. Featuring a standard size protection head with a gasketed cap to seal out dust and moisture and houses a ceramic terminal block. Head has a 3/4" NPT(F) opening on the side for easy connection to electrical conduit.

Spring loaded probes: designed to bottom out when inserted in to a thermowell to produce an accurate reading. (Not designed for direct insertion in to medium)

Non-spring loaded probes: designed to be directly inserted into the medium being measured without the use of a thermowell.

*Please note we can only ship RKI products to customers within the United States