$10 - $15

AI1107 3M KCl Storage Solution 4 oz. by Apera

This storage solution is for conditioning and extending the service life of regular pH and ORP electrodes/testers/sensors. pH/ORP electrodes that are stored dry will lose their sensitivity and accuracy temporarily. They can be restored by soaking in the KCL solution. Keeping pH/ORP electrodes stored in the storage solution when not in use is a recommended practice. The storage solution works well for Apera Instruments regular pH and ORP meters and electrodes e.g. PH20, PH60, 201T-F, 301PT-C.

Expiration date specified on the bottle.

Content: 3M KCL solution

Volume: 4oz.

SA1500-P Alkalinity Titrant, Sulfuric Acid 0.02N (N/50), 500mL by AquaPhoenix

• 1 mL = 20 ppm as CaCO3 / 50 mL
• APHA for Alkalinity, 2320-B
• Traceable to NIST

Specifications

• Concentration: 0.02N (N/50)
• Packaging Type: Poly
• Size: 500 mL

MA9001 pH 1.68 @ °C/77 °F Calibration Buffer Solution: accuracy +/- 0.01 pH - 230 ml by Milwaukee

Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month.

MA9001 is a lab grade pH 1.68 buffer solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing buffers.

Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode.

DESIGN FEATURES

• pH 1.68 Calibration Buffer Solution (230 mL)
• Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings
• Sealed against light with air tight, tamper proof cap
• Ideal for fast calibration
• Simply open, pour into a beaker or container and insert the tester or electrode to start the calibration process.

18527-93 Compression Fitting; Probe Diameter 1/4"; 316 Stainless Steel 1/8" NPT (M) by Digi-Sense

Use fittings for straight-shaft probes and metal tubing only. Tighten compression nut to secure and completely seal probe. Replacement ferrules let you reuse a compression fitting when replacing a worn-out probe. Simply disassemble fitting, discard probe and old ferrule, install replacement ferrule over probe sheath, and retighten fitting. Connectors come in both 316 Stainless Steel and Brass.

• Available in both 316 Stainless Steel and Brass

08080-90 Stainless Steel Bimetal Pocket Thermometer, 1.75" Dial, Glass Lens, 8" Stem, 25-125F, 1F Div by Digi-Sense

• Factory tested to three points with a ±1% accuracy
• Minimum immersion: liquids 2" (50 mm), gases 4" (100 mm)
• Hermetically sealed dial stops internal fogging
• Recalibrate using external adjustment nut
• 304 Stainless Steel dial case and stem
• Shock resistant

Includes

All thermometers come with a statement of test and a beaker clip.

TDSK12880/P Potassium Chloride TDS Solution, 12880uS/cm (Pt) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

37803-50 Control Company Replacement Printing Paper; 2 Rolls/Pk by Digi-Sense

Replacement humidity probe, communcation cables, and other accessories to customize your system.

BC2010-B Barium Chloride Solution, 10% w/v, 60mL by AquaPhoenix

Specifications

• Packaging Type: Poly
• Size: 60 mL

18527-74 Dual Thermocouple Connector, Mini, Male, Type-K; 1/ea by Digi-Sense

• Glass-filled nylon construction with molded barriers to prevent short circuit
• Each connector comes in ANSI color coded material: type J-black, type K-yellow, and type T-blue

TDSK300000/P Conductivity Standard Solution, 300,000uS (Pt) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

TDS60000/P Conductivity Solution, 60,000ppm/60,000uS, 1Pt1 by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

18527-20 Standard Type-J Thermocouple Female Connector, 2 Pin by Digi-Sense

• Molded barriers prevent short circuit and the solid pin design ensures good contact even in demanding applications
• Miniature connectors are suited for small wires and mineral insulated cables
• Connector-body color is brown, calibration type (J or K) is printed on the body

08080-91 Stainless Steel Bimetal Pocket Thermometer, 1.75" Dial, Glass Lens, 8" Stem, 0 to 180F, 2F Div by Digi-Sense

• Factory tested to three points with a ±1% accuracy
• Minimum immersion: liquids 2" (50 mm), gases 4" (100 mm)
• Hermetically sealed dial stops internal fogging
• Recalibrate using external adjustment nut
• 304 Stainless Steel dial case and stem
• Shock resistant

Includes

All thermometers come with a statement of test and a beaker clip.