Reg-0.5

BW Technologies Calibration Gas Regulator (0.5 LPM)

Part Number: REG0.5

BW Technologies REG-0.5 Regulator (0.5 LPM), Fits 34GAL, 58GAL, 100GAL

Regulator - Calibration for Gas Monitors

Max XT (internal pump included)

The Max XT confined space kit (CSK) includes:

Max XT	Part #
Max XT Instrument	XT-XWHM-Y-NA (O2 CO H2S LEL)
Case	XT-CK-CC
Gas	CG-Q34-4
Regulator	REG-0.5
IR Kit	GA-USB1-IR
Probe	GA-PROB1-1

Part Number: XTXWHMYNACS

Quattro (diffusion only – no internal pump)

The Quattro confined space kit (CSK) includes:

Quattro	Part #
Quattro Instrument (Alkaline Battery)	QT-XWHM-A-Y-NA (O2 CO H2S LEL)
Case	XT-CK-CC
Gas	CG-Q34-4
Reg	REG-0.5
IR Kit	GA-USB1-IR
Probe	Included as part of QT-AS01
Aspirator kit	QT-AS01

Part Number: QTXWHMAYNACS

QT-XWHM-R-Y-NA-CS GasAlertQuattro Premium Confined Space Kit with Instrument and Calibration Gas

If do not already own the standard four gas version of the GasAlertQuattro and are also in need of the confined space kit, then this is the best version to order.

Why?

The short answer is that it is easier and faster.

Unlike the Deluxe Confined Space Kit version (QT-CK-DL) which doesn't include the instrument or calibration gas, this version includes both. No need to order a separate monitor and separate calibration gas cylinder. The monitor is the standard CO,H2S,O2,LEL configuration, and the calibration cylinder that comes with it is the CG-Q34-4 which contains 100PPM CO, 25 PPM H2S, 18%/Vol O2, and 50% LEL CH4 (Methane). The reason there are two different confined space kits is that the Deluxe Confined Space Kit (QT-CK-DL) was designed for customers that already own the monitor and need to add the kit as an after market purchase, or customers that are purchasing a configuration other than the standard four gas.

What is included?

• QT-XWHM-R-Y-NA Rechargeable GasAlertQuattro with CO(Carbon Monoxide), H2S(Hydrogen Sulfide), O2(Oxygen), and LEL(Methane) sensors
• CG-Q34-4 Calibration cylinder
• REG-0.5 Regulator - 0.5 Liters per minute flowrate
• Rugged Aluminum Carrying Case
• Wall Charging Adaptor
• Auxiliary Filter Kit
• Calibration cap with 1 foot of tubing
• IR Connectivity Kit with Fleetmanager II software
• Manual Aspirator Kit
• Sampling Probe
• Both Rechargeable and Alkaline battery packs for greater versatility

MC-CK-DL Deluxe Confined Space Kit for the GasAlertMicroClip, GasAlertMicroClip XT, and GasAlertMicroClip XL versions

Don't risk getting to the job site and realizing that you forgot an important piece of equipment. Get everything you need for confined space work in one convenient package. Bundled in a rugged aluminum carrying case with laser cut foam cutouts, this case is sure to withstand the daily rigors of the most demanding job site. Inside you will find all the tools and accessories to perform your job and tackle any task when it comes to detecting dangerous gasses in the workplace.

What comes with it?

Inside you will find:

• Regulator (REG-0.5)
• IR connectivity kit with Fleet Manager Software (GA-USB1-IR)
• Carrying strap (GA-ES-1)
• Test cap and hose (MC-TC-1)
• Manual aspirator pump kit with 1 ft probe (MC-AS01)
• Carrying case (MC-CK-CC)
• Auxiliary Filter Kit (MC-AF-K1)
• Leather carrying case (MC2-LC-1)

Note: Calibration gas is sold separately. If your monitor is the standard four gas configuration (CO,H2S,O2,LEL) then you will need part number CG-Q34-4. The easiest way to locate this item is to type the part number into the search box at the top of this page and that will take you to the cylinder. If you have a different configuration please navigate to the calibration equipment section in the navigation and locate the cylinder that matches your configuration. You will want to choose the 34 Liter size since the 58 Liter is too large to fit in the carrying case.

Gas Alert Quattro Multi Gas Monitor by BW Technologies

What it does

• Multi gas monitor that detects 1 to 4 of the following gases: CO (Carbon Monoxide), H2S (Hydrogen Sulfide), O2 (Oxygen), LEL (Combustible gases including Methane).

Features

• Large LCD screen for easy visual readout
• Rubberized housing to withstand drops
• Real time gas concentrations with auto backlight in low light conditions
• Instantaneous Low and High Alarms
• TWA (Time Weighted Average) and STEL (Short Term Exposure Limits) alarms
• Three alarms for added safety. Bright Red Visual alarm, loud audible buzzer, and vibrating alarm
• Available in rechargeable or alkaline versions
• Fast one button calibration that only takes 120 seconds
• Sure cell sensors for accurate readings and fast response to gas hazards

Is the Gas Alert Quattro the right monitor for me?

Yes, if you are doing confined space work. Many instruments on the market are overly complicated and oriented more towards industrial hygiene professionals. The Gas Alert Quattro is made for workers entering confined spaces and is easy to use. Simply press the button to turn the instrument on. After a short warm up procedure it will then display the current levels of gas. The instrument is now ready to use. To ensure safety the new Intelliflash feature will emit a flashing green light every few seconds so that you can have complete confidence that the monitor is operating properly.

What are the Differences between the discontinued Gas Alert Micro and the new Gas Alert Quattro?

The Gas Alert Micro was a very popular instrument that was discontinued by BW Technologies and replaced by the new Gas Alert Quattro. Many customers have expressed an interest in the differences between these two monitors. The main differences are the larger easier to read LCD display and the new Surecell sensors, and water resistance. One of the drawbacks of the Gas Alert Micro was its display which was sometimes hard to read. This has been completely fixed in the new Gas Alert Quattro which features a large easy to read display. Another improvement is the water resistance which is rated at IP 66/67 and protects against being dropped in the water or used in the rain.

Sampling Options

The Gas Alert Quattro is a diffusion style gas monitor meaning that it does not have a built in sampling pump, however remote sampling is easily accomplished with the Gas Alert Sampler Pack (P/N# GA-SPAK). This kit contains the sampling pump and tubing which will allow you to take remote gas samples. Simply attach the Sampler Pack to the Quattro and drop the tubing down into the confined space. You must take a sample reading every 4 feet since different gases have different weights and this causes the gases to be located at different levels. For example Methane which is lighter than air will tend to hover around the top of the confined space. Hydrogen Sulfide which is a gas that is heavier than air will tend to hover around floor level. You will also need to wait 2 seconds per foot of tubing for the gas to make its way through the tubing and back to the instrument.

Flexible Power Options

Choose between Rechargeable or Alkaline batteries. The rechargeable option is good if you are using the instrument every day. The Alkaline option is a good choice if you are using the monitor for doing quick spot checks or if you don't need to use it frequently. One of the most attractive features of the Gas Alert Quattro is the ability to quickly swap between Alkaline and Rechargeable packs. This is especially ideal if someone forgets to charge the instrument, simply switch to the alkaline pack and you are ready to work. No wasted time waiting for the battery to charge.

Calibration

Calibration on the Gas Alert Quattro is not an intimidating and arduous task like it is on some other gas monitors. It is a simple one button procedure that takes 2 minutes. To calibrate just turn on the Gas Alert Quattro and hold down the on/off button. The instrument will turn off but continue holding down the button, it will then turn back on and go into a countdown 3, 2, 1. After the countdown it will then automatically zero the sensors and then go into auto span. At this point attach the calibration gas and the Gas Alert Quattro will do everything else. When the calibration is complete you will be notified by a beep and the instrument is now accurately calibrated. The cylinder of calibration gas that you will need is 100 PPM CO, 25 PPM H2S, 50% LEL CH4 (Methane), and 18%/Vol O2 (P/N# CG-Q34-4). The regulator is a 0.5 LPM regulator which attaches to the cylinder(P/N# REG-0.5). The calibration adaptor comes in the box with each instrument. For customers that choose not to purchase a calibration kit you can send the Quattro in every 6 months for professional calibration.

Part Number: QTXWHMABNA