Schaefer

20" Aluminum Square Fan Blade, 3-Wing

Pro-Kool Evaporative Cooling Pad, 4" x 12" x 36" - 3 Required Per Unit

30" Aluminum Square Fan Blade - 14 Degree Pitch

VK24 - 10" Fan Mount

FFM363S12DD 36" Fiberglass Direct Drive Exhaust Fan, 3-Wing Stainless Steel Blade, 1 / 2 Hp by Schaefer

Schaefer fiberglass exhaust fans are designed and built to be highly efficient (high cfm/watt), long lived and competitively priced fans for agricultural and other applications. The fiberglass exhaust fans are used worldwide to exhaust high volumes of air from factories, warehouses, garages and other locations, where building owners value low capital cost and low operating cost. Fans ship fully assembled with aluminum inlet shutters, self-adjusting belt tensioner and powder coated outlet guard.

Features and Benefits:

• Totally enclosed, thermally protected motors for safety and long life
• Easy belt replacement, minimal maintenance required
• Remote Lubrication System optional
• Aluminum inlet shutter and powder coated outlet guard
• Suitable for buildings with up to 12" wall thickness
• Available in 36", 48" and 52" sizes
• 1-phase and 3-phase motors of various sizes
• 15 year housing warranty
• Two year warranty
• Made in the USA

Pole Mount Horizontal with Base (Customer supplied 16' of 3-1 / 2" Schedule 40 pipe)

BDVFD240N4 VFD 3 Hp 200 / 240V 1- and 3-Phase NEMA 4X (Indoor / Outdoor) by Schaefer

Mist Control System (MCS) is available to control the misting accessory of your BIGDOG. The MCS senses ambient humidity and turns off the BIGDOG low pressure misting system when humidity rises, ensuring floors do not get wet and the air does not get over saturated.

483B1 48" Galvanized Exhaust Fan in Box Housing, 3-Wing, 1 Hp, Belt Drive by Schaefer

Maintain a safe and productive work environment by exchanging hot or contaminated air using Schaefer low cost galvanized, box exhaust fans. These low cost, high volume exhaust fans are protected from the elements with outlet side aluminum shutters and mount in walls of almost any thickness, typically with the outlet shutter flush, or nearly flush with the outside wall. Fans ship fully assembled with aluminum inlet shutters, self-adjusting belt tensioner and galvanized outlet guard.

Features and Benefits:

• G90 galvanized construction, for corrosion resistance and long life
• Totally enclosed, thermally protected motors for safety and long life
• Easy belt replacement, minimal maintenance required
• Remote Lubrication System optional
• Suitable for buildings with any wall thickness
• Available in 36" or 48" sizes
• 3-wing or 5-wing blade style
• Two year warranty
• Made in the USA

36" Versa-Kool Extreme High Velocity Misting Fan, 3-Phase, 60 Hz, Unassembled

523P1-3 52" Polymer Panel Fan, 3-Wing, 1 Hp, 3-Phase by Schaefer

Schaefer 52" polymer panel fans are impact resistant, belt drive fans that deliver an incredible amount or air, draw very little energy and make less noise then most other fans. Ideal for agricultural facilities with a higher susceptibility to corrosion and "show dairies" requiring specific aesthetics.

Features and Benefits

• Polymer housing with UV inhibitors and gloss finish for durability and corrosion resistance
• Heavy-duty, totally enclosed, maintenance free, energy efficient motors for long life
• Galvanized (3-wing or 5-wing) or stainless (3-wing or 6-wing) blades available
• Two year warranty
• Made in the USA

VK20 - 8" Fan Mount

1-Phase/Single-Speed Motor, 1/10 Hp, 115/230V, 60 Hz, 1725 rpm

AM-DS0825CB 8"x25' Duct with Cinch Strap in Carrying Bag by Schaefer

Industry standard quality ducting for everyday use. Single ply, PVC vinyl-coated polyester fabric with 15-gage spring steel wire helix and external PVC wearstrip. PVC coated polyester fastening cuffs at both ends with industry standard spring buckle cinches. Flame retardant. Available in 8" (15', 25'), 12" (15', 25') and 20" (25') sizes. Integrated carrying bags available with 8"x 25', 12"x 25' and 20"x 25' ducts.

36" Slant Wall OSHA Inlet and Outlet Guards, Installed

BDVFD240-1N4FD VFD 3 Hp 200 / 240V 1-Phase Filtered Input / Disconnect NEMA 4X (Indoor Only) by Schaefer

Mist Control System (MCS) is available to control the misting accessory of your BIGDOG. The MCS senses ambient humidity and turns off the BIGDOG low pressure misting system when humidity rises, ensuring floors do not get wet and the air does not get over saturated.

VK12 - 12" Versa-Kool Circulation Fan, Cord, Mount by Schaefer

Reduce heat stress and improve air quality with Schaefer's uniquely designed circulation fans. Unrivaled in the market, these fans are engineered to produce greater air movement and superior cooling no matter the application. You don't hear them. You don't see them. You only feel them!

Also known as Horizontal Air Flow (HAF) fans, these fans move air in a coherent horizontal pattern creating a gentle 'racetrack' air flow pattern needed in greenhouses to maximize heat distribution and humidity control by mixing the air, from ceiling to floor.

Features and Benefits

• Deep guard design for unmatched performance, low noise levels and safety without sacrificing airflow
• Matched high quality motors and blades for maximum efficiency
• Powder coated steel guards for increased durability and corrosion resistance
• Hot dipped galvanized guards on VK12-GA and VK20-GA models for even greater rust protection
• Powder coated steel mounting bracket and power cord included
• Wide variety of mounting options available for flexible and easy installation
• Variable speed controls available
• Misting kits available for even greater cooling
• Two year warranty
• Made in the USA

Pad Set for WC-1Hp (8 Full Pads)

Square Pedestal for 20" - 36" CFO Fans

485P1-3 48" Galvanized Panel Fan, 5-Wing, 1 Hp, 3-Phase by Schaefer

Schaefer's galvanized steel panel fans combine low cost, high airflow and high air speeds for very high ROI livestock cooling. These fans are designed for agricultural livestock buildings requiring large volumes and velocities of air with a belt driven preference. Regardless of application, free stall barns, feed lines or holding pens, Schaefer offers a wide variety of galvanized panel fans to meet your specific needs. Ships fully assembled, complete with belt tensioner.

Features and Benefits

• Industry leading airflow and efficiency with airflows up to 40,000 cfm and efficiencies up to 40 cfm/watt
• Lab tested design for maximum performance and quiet operation
• Heavy gauge galvanized and powder coated steel components
• Thermally protected TEAO motors for long life
• Optional post and column mounts available
• Available in 24", 36", 48", 52" and 54" sizes
• 3-wing or 5-wing blade style
• Two year warranty
• Made in the USA

AM-DSR1225 Metal Duct Storage Rack, 12" by Schaefer

Made of durable metal for safe duct storage. Stores up to two 15' duct lengths or one 25' duct. Holds compressed duct securely with the retention bar while allowing for easy removal. Designed with a centrally located handle to maximize portability. Available for 8" and 12" ducting only.

36" Galvanized Fan Blade, 5/8" Bore, 22 Degree Pitch

603GP2-3V-HE 60" Galvanized Panel Fan, 3-Wing, 2 Hp, 3-Phase, High Efficiency, VFD Compatible by Schaefer

The Schaefer 60" panel fan is designed with large air movement and energy efficiency in mind. These fans feature farm-duty drive belts, heavy-duty, totally enclosed, VFD capable motors and automatic idler tensioner arms. Use in agricultural buildings requiring large volumes and velocities of air movement. Ideal for freestall barns, feed lines, parlors, and holding pens.

MSC-400 Manual Variable Speed Control by Schaefer

Our broad range of sensors and manual/automatic controls allow dairymen, greenhouse operators, plant managers and others to control fans and heaters and optimize thermal comfort in their facilities.

1-Phase/Single-Speed Motor, 1/2 Hp, 115/230V, 1725 rpm