Multi-Gas Monitors

SR-W-MP75C Replacement MICROpeL Combustible (LEL) Sensor

BW Technologies Replacement Battery Kit

BW Technologies creates and manufactures a vast range of portable gas detection devices, compatible accessories, enhancement attachments, and replacement parts. The company aims to provide users with all of the equipment necessary to ensure the effective use and operation of BW Technologies' devices, as well as complete customization options. The BW Technologies Replacement Battery Kit is a quick an easy way to maintain operation while in the field. The compact pack easily fits into a utility belt or pocket for emergency uses. Having a spare replacement battery kit is useful for unforeseen power outage or battery incidents in the field.

Part Number: XTBATK1

QT-XWHM-R-Y-NA-CS GasAlertQuattro Premium Confined Space Kit with Instrument and Calibration Gas

If do not already own the standard four gas version of the GasAlertQuattro and are also in need of the confined space kit, then this is the best version to order.

Why?

The short answer is that it is easier and faster.

Unlike the Deluxe Confined Space Kit version (QT-CK-DL) which doesn't include the instrument or calibration gas, this version includes both. No need to order a separate monitor and separate calibration gas cylinder. The monitor is the standard CO,H2S,O2,LEL configuration, and the calibration cylinder that comes with it is the CG-Q34-4 which contains 100PPM CO, 25 PPM H2S, 18%/Vol O2, and 50% LEL CH4 (Methane). The reason there are two different confined space kits is that the Deluxe Confined Space Kit (QT-CK-DL) was designed for customers that already own the monitor and need to add the kit as an after market purchase, or customers that are purchasing a configuration other than the standard four gas.

What is included?

• QT-XWHM-R-Y-NA Rechargeable GasAlertQuattro with CO(Carbon Monoxide), H2S(Hydrogen Sulfide), O2(Oxygen), and LEL(Methane) sensors
• CG-Q34-4 Calibration cylinder
• REG-0.5 Regulator - 0.5 Liters per minute flowrate
• Rugged Aluminum Carrying Case
• Wall Charging Adaptor
• Auxiliary Filter Kit
• Calibration cap with 1 foot of tubing
• IR Connectivity Kit with Fleetmanager II software
• Manual Aspirator Kit
• Sampling Probe
• Both Rechargeable and Alkaline battery packs for greater versatility

Part Number: MC2FPCB1

*Please note we can only ship RKI products to customers within the United States

Part Number: SR-W04-75

*Please note we can only ship RKI products to customers within the United States

DX-MAXXT IntelliDoX Docking Station for BW MaxXT II by BW Technologies

IntelliDoX is a high tech way to combine your Fleet Manager II software with docking modules. It's as easy as connecting the gas monitor to the docking module. The IntelliDoX does all the testing for you and transfers the data from the unit to the IntelliDoX . With this form of automatic management, you increase productivity, efficiency, and reliability. In addition, the entire unit only weighs a little over four pounds.

Do your workers have to wait in line for bump tests at the start of each shift? This is no longer needed when you have the IntelliDoX system in place. It takes under 30 seconds to bump test 5 units at one time.

Do you have a great deal of monitors to keep up with? You can gang together as many as five IntelliDoX to manage a large fleet of gas detectors at the same time. Five units can bump test as many as 50 detectors in less than three minutes. And each module can work on its own.

The IntelliDoX can work by itself or can be networked with an Ethernet connection. Keeping track of records has never been easier. For example, you will enjoy quick and easy access to peak exposures, bump test results, and other important detection data.

Fast bump only takes 10 seconds. Standard bump is 40 seconds, and it can be placed in hibernation mode. The IntelliDoX comes with a complete 2 year warranty.

Features

• Peak reading display
• Time of peak reading
• High alarm set point
• Low alarm set point
• Alarm with gas readings
• Clock
• Bump test reminder
• Noncompliance indication
• Engage hibernation mode

Your IntelliDoX Comes with:

• Wall mount - also works as a stand and is retractable
• Ethernet port
• USB port
• Guide for quick reference
• Manual with CD
• ntelliDoX module - nest for portable gas detector has been installed at the factory.
• Software CD - Fleet Manager II

You will need to purchase an enabler kit for every five units banked together. The kit comes with power supply and hoses.

Part Number: DX-MAXXT

DOCK2-2-1C1N-00-G MicroDock II Automatic Test and Calibration Station with GasAlertQuattro Module (Charging) with Power Supply and 2 Inlets by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221C1N00G

BW Technologies GasAlertMax XT II Replacement Screw Kit (40 Screws)

The GasAlertMax XT II Replacement Screw Kit comes complete with 40 screws that are compatible with the BW Technologies GasAlertMax XT II portable gas detection system. The replacement screw kit includes enough screws for several replacement incidents. BW Technologies offers a full range of portable gas detection systems and manufactures a wide variety of accessories and replacement parts that extend the lifespan of your BW Technologies device. For more information about your device's compatible replacement parts and accessories, please consult your product's specification sheet.

Part Number: XTSCREWK1

BW Technologies Replacement Screw Kit (40 screws)

BW Technologies produces a range of replacement parts for many of their product lines. From covers and filters to screws and sensors BW Technologies replacement parts are convenient and cost-effective solutions for your BW Technologies devices. This kit of replacement screws is compatible with numerous BW Technologies gas detection devices and parts. The replacement screw kit is available with 40 screws.

Part Number: QTSCREWK1

Quattro (diffusion only – no internal pump)

The Quattro confined space kit (CSK) includes:

Part Number: QTXWHMAYNACS

*Please note we can only ship RKI products to customers within the United States

• Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
• Simple one-button operation
• Standard datalogger (16 hours) and eventlogger (10 events)
• Durable, stainless steel alligator clip
• Integral concussion-proof boot for the most rugged environments
• Continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane)
• Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
• Provides 95 dB alarm tone and bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Backlight: in alarm (auto) and on demand reactivation
• Four alarm levels: Instant Low and High Alarm for all gases;TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
• Simple automatic calibration procedure
• Fully compatible with BW's MicroDock II automatic test and calibration system
• Records TWA, STEL and maximum exposures to gas and displays readings on command
• User selectable options include: confi dence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
• Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
• Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions

Part Number: MCLCDK1

722-107-02-P2 Eagle 2 Portable Monitor for CO2 60% Volume (IR)/VOC?s 0 - 2,000 ppm (PID) by RKI Instruments

Continuing in its legacy of durable and reliable gas detection and monitoring systems, RKI Instruments is proud to offer a new product in its popular Eagle portable gas detector series. The Eagle 2 can monitor up to 6 different gases and is equipped with several exclusive features that can only be found with the Eagle series. In addition, its large glove friendly push buttons and LCD screen ensure an ease of use when onsite. Rated intrinsically safe, the Eagle 2 is equipped with state of the art technologies that are not available with other competitive gas detectors and monitors.

Specialty Sensors

The Eagle 2 has a variety of available specialty sensors. Workers can use a photoionization detector for low or high range VOC detection and Fence Electrode Technology for humidity and contamination resistance. An infrared sensor is available for Co2, % LEL CH4, % Volume CH4, % LEL HC, and % Volume HC. Thermal conductivity sensors are available for % Volume H2 and % Volume CH4. The unit is also compatible with the smart plug and play toxic sensors for the detection of NH3, AsH3, CI2, HCN, PH3, and SO2. With the wide variety of sensors and gas detection available, the Eagle 2 can be customized to meet almost all worksite gas detection needs.

Exclusive Features

The monitor has a long internal pump that can draw samples for up to 125 feet. The pump features a low flow auto shut off and alarm. This allows operators to respond swiftly from a safe distance. The unit is multilingual with 5 different language preferences, and features an alkaline battery life of 18 hours or a NiMH life of 20 hours. To protect the integrity of the device and the configurations, the unit can be password protected. The Eagle 2 also has standard data logging capabilities for easy research, evaluation, and site monitoring. To reduce calibration costs and time, the unit features an automatic calibration option and a single gas calibration option.

The Eagle 2 is heavily protected from environmental conditions by a weather proof, chemical resistant RFI/EMI coated high impact polycarbonate/PBT blend enclosure. The enclosure also renders the unit water and dust resistant. Because of the enclosure, the Eagle 2 can function in 2 inches of water without leakage.

Eagle 2 Specifications

The portable and durable unit is lightweight at less than 4 pounds. Its dimensions are suitable for convenient carrying (9.5?L x 5.25?W x 5.875?H), and it features a conveniently placed durable top handle. The large easy to read display has a polyurethane overlay backlights on demand and when the alarm is activated. The 2 alarm channels are fully adjustable for the user and can be password protected. With a 95 dB buzzer and 4 high intensity LEDs, the alarm is sure not to be missed. The Eagle 2 is standard with a 2 year warranty for material and workmanship and a 1 year warranty for PID sensor.

*Please note we can only ship RKI products to customers within the United States

Part Number: XTPC1

*Please note we can only ship RKI products to customers within the United States

Part Number: MC2FC1B

MC2-0W00-B-NA GasAlertMicroClip Extreme Detector Combustible (%LEL) - Black Housing by BW Technologies

When purchasing a gas and atmospheric detection device, buyers should evaluate their needs to determine the most appropriate device on the market. At BW Technologies by Honeywell, safety and reliability are top priorities. After years of research and development in gas and hazardous atmosphere detection, BW Technologies has introduced the GasAlertMicroClip XT into the gas monitoring market. Its sleek design and affordable price point place this gas detection system at the top of the market.

When looking for a safe, affordable, and reliable gas monitoring system, look no further than the GasAlertMicroClip XT. The compact and portable design offers the most affordable protection in gas monitoring systems. Using the latest technology, and intuitive user friendly features, users are able to work confidently with knowledge that the GasAlertMicroClip XT will appropriately alert them to possible gas hazards.

Simple design and portability

At approximately 6 ounces, BW Technologies by Honeywell has introduced a safe, reliable, and highly portable gas detection unit. The slender and compact design is met with a bright yellow casing to help ensure that the device is not left behind on the worksite. The casing also helps to make the device water resistant and includes a built in concussion proof boot. In line with its simple design, the GasAlertMicroClip XT features a one button design that is both tamper-proof and intuitive.

Standard features

The exclusive IntelliFlash feature alerts users and those nearby that the GasAlertMicroClip XT is operating and functional. The LCD screen also consistently displays real time gas concentration levels. Like many products developed by BW Technologies, the MicroClip features a standard triple alarm system designed to alert users visually, audibly, and with vibrations. This multifaceted alarm system ensures that users and those nearby are well alerted of possible dangers regardless of visual or hearing impairments, including loud worksites.

Optional features and accessories

The GasAlertMicroClip XT also allows for users to customize certain features. Features such as alarm settings, display settings, test and calibration settings, start-up options, sensors, overrides, and measurements can be manually altered by the user. The MicroClip is compatible with the MicroDock II automatic test and calibration system. Additional accessories can be purchased including auxiliary filter kits, IR connectivity kits, and five unit cradle charges. By allowing users to customize various features and options, BW Technologies is ensuring that its gas detectors will continue to provide value to its buyers for many years.

Specifications

The GasAlertMicroClip XT monitors H2S, CO, O2, and combustible gases at varying measurement ranges. The device is compact at 4.4 inches long by 2.4 inches wide and 1 inch thick and features wide angle alarm bars that indicate alerts from all angles. On activation, the unit will automatically test audible and visual alarms, sensors, battery, and circuitry. The typical batter life is up to 10 hours with a 4 hour recharge time frame. As a testament to its commitment to safety and excellence, BW Technologies by Honeywell also offers a standard 2 year warranty that covers the sensors in addition to the unit.

Part Number: MC20W00BNA

BW Technologies Hydrophobic Pump Filter Replacement (Kit of 5)

BW Technologies manufactures some of the most advanced portable and personal gas detectors in the world. The company also produces a range of accessories, attachments, and replacement parts that help to extend the lifespan of their advanced portable gas detectors. For devices utilizing a hydrophobic pump, BW Technologies offers their Hydrophobic Pump Filter Replacement Kit. The replacement filters easily fit inside the device and work to protect the detector from moisture and debris. This specific kit has 5 filters.

Part Number: XTRFH5